products

In the inlet transformer where insulators including insulating oil, insulating paper, and press board are used, poor manufacturing of insulating materials or deterioration of age may result in initial partial discharge due to weakening of insulation strength. Depending on the time of use, such partial discharge will further weaken the insulation resistance, leading to unforeseen major accidents.

In the inlet transformer where insulators including insulating oil, insulating paper, and press board are used, poor manufacturing of insulating materials or deterioration of age may result in initial partial discharge due to weakening of insulation strength. Depending on the time of use, such partial discharge will further weaken the insulation resistance, leading to unforeseen major accidents.

Insulation defects caused by prolonged operation of power facilities including switchboards, power cables, and GIS are some of the main causes of power plant failure. Insulation defects result in partial discharge, which causes the insulation to deteriorate, resulting in power outage.

Insulation defects caused by prolonged operation of power facilities including switchboards, power cables, and GIS are some of the main causes of power plant failure. Insulation defects result in partial discharge, which causes the insulation to deteriorate, resulting in power outage.

Insulation defects caused by prolonged operation of power facilities including switchboards, power cables, and GIS are some of the main causes of power plant failure. Insulation faults result in partial discharge, which causes the insulation to deteriorate, resulting in power outage.

Insulation defects caused by prolonged operation of power facilities including switchboards, power cables, and GIS are one of the main causes of power plant failure. Insulation defects result in partial discharge, which causes the insulation to deteriorate, resulting in power outage.

The noise sensor is attached to the outside of the switchboard through a magnet and is mainly used to measure the noise signal in the environment in which the switchboard is located. For example, noise signals such as cell phone signals, inverter noise, and servomotor can enter the switchboard through the switchboard observation hole.

Insulation oil, insulation paper, press board, insulation tape, etc used as insulation for inlet devices, such as transformers, are decomposed by heat or ARC resulting from transformer overload or failure, resulting in hydrogen (H2) and hydrocarbon gas.

Insulation defects caused by prolonged operation of power facilities including switchboards, power cables, and GIS are some of the main causes of power plant failure. Insulation defects result in partial discharge, which causes the insulation to deteriorate, resulting in a power outage.